EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 73)

Calibrating Other Power Meters with the IQS-1500
Power Meters 65
Entering DUT Information
Entering DUT Information
The DUT window allows you to enter information about the calibrated DUT
(power meter), including details on the DUT (serial number, description,
etc.), on the company owning the DUT, plus any useful comment.
Note: This information is kept in memory when using the template option as
explained in Selecting the Calibration Option on page 60.
The Wavelength List allows you to enter any wavelength or wavelengths at
which the DUT will be calibrated.
To add a wavelength to the list:
Enter the value in the New Value (nm) box, then click
.
To remove a wavelength from the list:
Select it by clicking it once, then click
.
Once you have entered the information about the DUT and managed the
wavelength list, click Next to proceed to the next step.