EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 140)

SCPI Command Reference
132 IQS-1100/IQS-1500
Product-Specific Commands—Description
:SENSe[1..n]:CORRection:OFFSet
[:MAGNitude]
Description This command sets an offset value. The units are
w/w by dÈfault.
If no channel was specified, the default channel
used is 1.
Syntax :SENSe[1..n]:CORRection:OFFSet[:MAGNitude]
W/W|DB]>|
MAXimum|MINimum|DEFault
Parameter(s) CorrectionOffset:
The program data syntax for
is defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> elements are: W/W|DB. The
special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the parameter.
Sets the offset for the specified channel.
Example(s) SENS:CORR:OFFS:MAGN 2.0
See Also SENSe:CORRection:OFFSet:[MAGNitude]?