EXFO IQS-1500 Power Meters for IQS-500/600 - Manual (Page 67)

Power Meters 59
9 Calibrating Other Power
Meters with the IQS-1500
In addition to performing usual power meter functions, your IQS-1500
Calibration Power Meter can be used to calibrate other power meters. This
is performed through a step-by-step wizard.
As you move along the steps, you will notice that the current step is
identified on the left by a circle.
Steps in red are not available at this moment in the calibration process. For
example, the Report step is not available until you have taken
measurements.
To access the Calibration mode:
Select the Calibration tab in the lower part of the Instrument function tab.
To navigate between the wizard steps:
Use the Back, Next, and Cancel buttons at the bottom of the window.
Wizard navigation
buttons
Current step
Unavailable
step (in red)