EXFO VDSL2 - Manual (Page 35)

Configure Tests for xDSL/IP Triple-Play Verification
VDSL2, ADSL2+, and IP Triple-Play Test Set 29
Configure Profile
To select a test configuration parameter to be used during a
DSL/Ethernet based test:
1. From the Select Config tab pane, use the up/down arrows to highlight
an old or new configuration file name.
2. Press to confirm the selection.
3. Press the left arrow to highlight the Read from File button.
4. Press to confirm the selection.
5. Press the up/down arrows to highlight the text edit box.
6. Use the alphanumeric keypad to enter a custom profile name.
7. Press the left arrow to highlight the Save to File button to save the
configured profile.