Reset configuration data (advanced menu), Boot-time diagnostic screen (advanced menu), Post beep sound (advanced menu) – Eurocom T890M ELEMENT User Manual
Page 99: Battery low alarm beep (advanced menu), Hyperthreading (advanced menu), Hyperthreading (advanced menu) -9

BIOS Utilities
Advanced Menu 5 - 9
5
Reset Configuration Data (Advanced Menu)
This item is set to No as default. You can change the setting to Yes if you have in-
stalled a new add-on which has reconfigured the system, resulting in such a serious
system conflict that the operating system is unable to boot.
Boot-time Diagnostic Screen (Advanced Menu)
Use this menu item to enable/disable the Boot-time Diagnostic Screen (see
Figure
5 - 1 on page 5 - 2
).
POST Beep Sound (Advanced Menu)
Use this menu item to enable/disable the beep as the computer starts up.
Battery Low Alarm Beep (Advanced Menu)
Use this menu item to enable/disable the battery low alarm beep.
Hyperthreading (Advanced Menu)
Hyperthreading will increase performance of your computer, depending on the hard-
ware and software you use, by activating additional CPU threads. Make sure your
OS supports Hyperthreading if you are installing a non-Windows OS.