Eurocom T890M ELEMENT - Manual (Page 151)

Intel Video Driver Controls
Display Modes B - 9
B
To Enable Intel(R) Dual Display Clone
1. Attach your external monitor to the external monitor port, and turn it on.
2. Go to the Intel GMA control panel (see “Intel Graphics Properties” on page B -
2 ) and click Display Devices.
3. Click to choose Intel(R) Dual Display Clone (Multiple Display).
4. Click Apply, and OK to confirm the settings change.
5. Click Display Settings to adjust the settings for the attached devices.
Figure B - 7
Display Devices &
Settings