Eurocom T890M ELEMENT - Manual (Page 51)

Hot-Swapping the Battery 1 - 31
Quick Start Guide
1
Hot-Swapping the Battery
If you have more than one battery included in your purchase option you can swap the battery while the system
is running.
1. Check the level of the backup battery from the on-screen menu.
2. Press the battery level button to display the indicator:
Figure 1 - 22 - Battery Level Indicator
3. The lower indicator will display the bridge battery level and the upper indicator displays the main battery level.
4. If the bridge battery level indicated “Ready” you can swap batteries.
5. Remove the AC/DC adapter cable from the DC-In jack (if applicable) and an on-screen icon will indicate the
main battery status if less than a 3% charge remains.
Figure 1 - 23 - Bridge Battery Ready Indicators
6. You can then remove the battery as per the instructions in “Removing the Battery” on page 1 - 30 .
7. When the battery is removed a beep will indicate that the system is running on bridge battery power (you have
up to 3 minutes maximum to swap the battery depending upon applications being used).
8. When a new sufficiently charged battery is inserted the beep will stop.
Main Battery Level
Bridge Battery Level
Battery Less than 3% Charge - Plug-in Adapter to Charge Battery Less than 3% Charge - Change Battery