Eurocom T890M ELEMENT - Manual (Page 120)

Modules
6 - 16 PC Camera Module
6
Zoom
The BisonCap program allows you to zoom the camera in and out.
1. Run the BisonCap program.
2. Go to Zoom and select Zoom Out/Zoom In.
Note that the Zoom Mode buttons DO NOT zoom the camera, but do allow you to
zoom in and out of captured pictures (e.g. jpeg files etc.).
Taking Still Pictures
The BisonCap program allows you to take still pictures.
1. Run the BisonCap program.
2. Go to Options and select Take Picture.
OR
3. When the camera is on, press the Camera Button to take a still picture
4. The picture (in JPEG format) will be placed in the Snapshot folder on the
desktop.
Note press the Camera Button and release it after you hear the camera shutter
sound (holding the camera button down will only turn BisonCap off).
Figure 6 - 12
Zoom/Setting
Snapshot Folder
The Snapshot folder’s
default location is on the
desktop. Do not move
this folder or an error
may appear when you
try to take a still picture.
If you accidentally de-
lete or move the folder,
you can create a new
Snapshot folder on the
desktop in order to cap-
ture the files.