beautypg.com

Mounting the pc board – Elenco Deluxe Digital / Analog Trainer with Tools Kit Version User Manual

Page 10

background image

-9-

MOUNTING THE PC BOARD

Note: The holes in the two side panels have been punched differently. Be sure that you have the correct side

panel when mounting them to the PC board.
IMPORTANT: Push the PC board up as far as possible before tightening the screws, as shown in Figure O.

r

Mount the PC board to the side panels with four 4-40 x 1/4” screws (see Figure N).

Do not tighten the screws.

r

Place the top panel onto the unit and align the components with the holes in the top panel. Push the PC

board up until the components come through the top panel and tighten the screws.

Figure O

Figure N

4-40 x 1/4” screws

Top legend side of PC board

Note: From the foil side of the PC

board, inspect the edges to be sure that

there are no component leads shorting

against the side panels.

Adjust the PC board

height with a 4-40 x

1/4” screw

4-40 x 1/4” screws