Display Devices Lifts up up 35 lbs - Manual (Page 3)

IP025-001 V3
IBL Lift Series Installation
07/05 Thor/Sales Info/Installation Materials/IBL Lift 3
Thanks for purchasing a Display Devices lift product. We’re sure your customer will
enjoy this lift for years to come. Our products are designed to be maintenance-free,
saving you future service time. If you experience any difficulties, please contact us at
303-412-0399. Thank you for your support.
Important Installation Notes
Before starting…
Read all instructions before installation.
CAUTION!
The lift is heavy! Take proper safety precautions and get adequate help
when raising the lift.
Leave metal shipping brackets in place to protect you and the lift from damage until
fully and securely mounted.
Ensure the electrical outlet is readily accessible and complies with the lift and projector
specifications for voltages and amperages.
Check above the ceiling for obstructions (i.e. water pipes, wires, cables, duct work,
extreme temperature variations, etc.) before beginning installation.
Ensure the ceiling structure is capable of holding at least four times the combined
weight of the lift and projector. This is a minimum requirement. Follow any local or
state codes that apply to your specific area.
Organize your mounting hardware and have the necessary tools on-hand before
installation.
Attach the projector, ceiling closure system, or other items to the lift only after the lift
has been properly installed and tested.
CAUTION:
Anytime you are installing or performing maintenance on the
lift, disconnect power at the receptacle or breaker/fuse panel, program the
lift to MANUAL MODE, or activate the NO MOVEMENT switch on the side of
the control box to prevent inadvertent movement of the lift.