Display Devices Lifts up up 35 lbs - Manual (Page 24)

IP025-001 V3
IBL Lift Series Installation
07/05 Thor/Sales Info/Installation Materials/IBL Lift 24
HOW DO I?
Program the remote to AUTOMATIC MODE
1. Press and hold the OVERRIDE button, followed by the STOP button. Release the
STOP then OVERRIDE buttons.
In the AUTOMATIC MODE, the lift will automatically descend to the proper show level,
rise to the HOME position, and descend to its lower limit service and maintenance.
Clearing Errors
To clear errors, press and hold the STOP button for 10 seconds and release. If the
same error occurs, call Display Devices technical support.
Front Back
UP
DOWN
STOP
SET
These two bottoms are accessed with a small point
OVERRIDE