D-Link DES-3226 - Manual (Page 89)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Port Access Control Statistics
To view the Monitor Authentication Statistics menu, highlight Port Access Control Statistics on
the Network Monitoring Menu and press Enter.
Figure 6-59. Monitor Authentication Statistics screen
Select the item from the screen above to show the desired information.
Figure 6-60. Show Authenticator State screen
This read-only field displays Authenticator State information. The polling interval can be set between 2
seconds and 1 minute using the space bar.
The information on this screen is described as follows:
• AuthState – The Authenticator PAE state value can be: Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held, Force_Auth, Force_Unauth, or N/A. N/A (Not Available)
indicates that the port’s authenticator capability is disabled.
• BackendState – The Backend Authentication state can be Request, Response, Success, Fail,
Timeout, Idle, Initialize, or N/A. N/A indicates that the port’s authenticator capability is disabled.
• AdmDir – Admin Controlled Directions can be either both or in.
79