D-Link DES-3226 - Manual (Page 66)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Figure 6-23. IEEE 802.1Q VLANs Configuration menu
802.1Q Static VLAN Settings
To create an 802.1Q VLAN, highlight Configure Static VLAN Entry and press Enter:
Figure 6-24. 802.1Q Static VLAN Settings screen
To create an 802.1Q VLAN, enter a VLAN ID number in the VID field and a name for the new VLAN in
the VLAN Name field.
To set the 802.1Q VLAN membership status of a port:
To enter the 802.1Q VLAN status for a port, highlight the first field of Egress/Forbidden. Each port’s
802.1Q VLAN membership can be set individually by highlighting the port’s entry using the arrow keys,
and then toggling between E and – using the space bar.
• E (Egress Member) – Specifies the port as being a static member of the VLAN. Egress
Member Ports are ports that will be transmitting traffic for the VLAN. These ports can be
either tagged or untagged.
• F (Forbidden Non-Member) – Defines the port as a non-member and also forbids the port
from joining a VLAN dynamically.
56