D-Link DES-3226 - Manual (Page 63)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Toggle the View Ports field to the range of ports to be configured. The Fast Ethernet ports displayed for
configuration in groups of 12 and the optional 100BASE ports are displayed together—if a 2-port rather
than 1-port extension module is installed. Enter the port number or port range in the Configure Port
from [ ] to [ ] field. After enabling or disabling STP Status, you can set the spanning tree port cost
and priority. Toggle the Bypass field to Yes if you want to enable the Switch to skip the usual waiting
time associated with the listening state.
Configure Static (Destination-Address Filtering) Table
The Configure Static (Destination-Address Filtering) Table menu allows you to access screens to
create, modify, and delete both Static Unicast Filtering Table and Static Multicast Filtering Table
entries, respectively.
Highlight Configure Static (Destination-Address Filtering) Table on the Configuration menu and
press Enter:
Figure 6-20. Configure Static (Destination-Address Filtering) Table menu
Setup Unicast Filtering Table
Highlight Configure Static Unicast Filtering Table on the menu above to access the following screen:
53