D-Link DES-3226 - Manual (Page 143)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
• Time Interval [1s ] – Select the desired setting between 1s and 60s, where “s” stands for
seconds. The default value is one second.
• Record Number [200] – Select number of times the Switch will be polled between 20 and 200.
The default value is 200.
• 64 – The total number of packets (including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
• 65-127 – The total number of packets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits but including FCS octets).
• 128–255 – The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
• 256-511 – The total number of packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
• 512-1023 – The total number of packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
• 1024-1518 – The total number of packets (including bad packets) received that were between
1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
• Show/Hide – Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and
1024-1518 packets received.
• Clear – Clicking this button clears all statistics counters on this window.
• View Table – Clicking this button instructs the Switch to display a table rather than a line
graph.
• View Line Chart – Clicking this button instructs the Switch to display a line graph rather than a
table.
MAC Address
The Web Manager allows the Switch’s MAC address table (sometimes referred to as a forwarding table)
to be viewed:
133