D-Link DES-3226 - Manual (Page 78)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Figure 6-41. PAE System Configuration menu
This menu displays the current Protocol Version being used and the status of the
SystemAuthControl. It also allows you to access the following three additional Port Access Entity
System Configuration screens.
Figure 6-42. Port 802.1X Capability Settings screen
To set up the Switch’s 802.1X port-based authentication, select which ports are to be configured in the
Configure Port from [ ] to [ ] field. Next, enable the selected ports by toggling the 802.1X Capability
field to Authenticator. Press APPLY to let your change take effect.
Note: You cannot configure a port to Authenticator when it is either a trunk port or LACP member port.
68