D-Link DES-3226 - Manual (Page 13)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
• Data filtering rate eliminates all error packets, runts, etc. at 14,880 pps per port at 100% of wire-
speed for 10Mbps speed.
• Data filtering rate eliminates all error packets, runts, etc. at 148,800 pps per port at 100% of
wire-speed for 100Mbps speed.
• 8K active MAC address entry table per device with automatic learning and aging (10 to 1000000
seconds).
• 8 MB packet buffer per device.
• 802.1D Spanning Tree support.
• 802.1Q Tagged VLAN support, including GVRP (GARP VLAN Registration Protocol) support for
automatic VLAN configuration distribution. All the supported VLANs (including dynamic joined
VLANs by GVRP and user-defined VLANs and the one reserved VLAN) can be up to 255.
• IGMP Snooping support.
• Port trunking support.
• RADIUS client support.
• EAPOL support.
• 802.1X port-based authentication support. Authentication methods: EAP MD5-Challenge (RFC
1994) and EAP TLS Authentication Protocol (RFC 2716).
Management
• RS-232 console port for out-of-band network management via a console terminal.
• Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of
network loops.
• SNMP V.1/V.2C Agent.
• Fully configurable either in-band or out-of-band control via SNMP based software.
• Flash memory for software upgrades. This can be done in-band via TFTP or out-of-band via the
console.
• Built-in SNMP management:
Bridge MIB (RFC 1493)
MIB-II (RFC 1213)
802.1p MIB (RFC 2674)
802.1q MIB (RFC 2674)
Entity MIB (RFC 2737)
IF-MIB (RFC 2233)
Ether-Like MIB (RFC 2358) –dot3StatsTable
SNMP V.2-MIB (RFC 1907)
3