D-Link DES-3226 - Manual (Page 109)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
The user-changeable parameters in the Switch are as follows:
• VLAN ID [ 1] – Enter a VLAN ID number in this field.
• State [Enabled] – Use the drop-down menu to enable or disable IGMP settings.
• Querier State [Non-Querier] – Select from Non-Querier, V1-Querier, and V2-Querier. This is used to
specify the IGMP version (1 or 2) that will be used by the IGMP interface when making queries.
• Robustness Variable [ 2] – A tuning variable to allow for sub-networks that are expected to lose a
large number of packets. A value between 1 and 255 can be entered, with larger values being
specified for sub-networks that are expected to lose larger numbers of packets.
• Query Interval [ 125] – Allows the entry of a value between 1 and 65535 seconds, with a default of
125 seconds. This specifies the length of time between sending IGMP queries.
• Max Response [10 ] – Sets the maximum amount of time allowed before sending an IGMP response
report. A value between 1 and 25 seconds can be entered.
• Add/Modify – Click this hyperlink to add or modify an IGMP entry on this window.
• Delete – Click this hyperlink to delete an IGMP entry on this window.
99