D-Link DES-3226 - Manual (Page 136)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
The information is described as follows:
• Time Interval [1s ] – Select the desired setting between 1s and 60s, where “s” stands for
seconds.
• Record Number [200 ] – Select number of times the Switch will be polled between 20 and 200.
• Unicast – Counts the total number of good packets that were received by a unicast address.
• Multicast – Counts the total number of good packets that were received by a multicast
address.
• Broadcast – Counts the total number of good packets that were received by a broadcast
address.
• Show/Hide – Check whether or not to display Multicast, Broadcast, and Unicast Packets.
• Clear – Clicking this button clears all statistics counters on this window.
• View Table – Clicking this button instructs the Switch to display a table rather than a line
graph.
• View Line Chart – Clicking this button instructs the Switch to display a line graph rather than a
table.
Transmitted (TX)
Figure 7-41. Tx Packets Analysis window (Line Chart)
126