D-Link DES-3226 - Manual (Page 73)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Configure Threshold of Broadcast/Multicast/DA-Unknown Storm
To configure the threshold of a broadcast, multicast, or DA (destination address)-Unknown Storm,
select Configure Threshold of Broadcast/Multicast/DA-Unknown Storm on the Configuration
menu and press Enter.
Figure 6-32. Setup Threshold of Broadcast/Multicast/DA-Unknown Storm screen
To use the features on this screen, toggle the desired option to Enabled, enter a threshold, and then
press APPLY.
Configure Port Security
To configure security for a specified port or range of ports on the Switch, select Configure Port
Security on the Configuration menu and press Enter.
Figure 6-33. Port Security Settings screen
To set up security for a port or ports, toggle View Ports to the desired range, enter the port or ports in
the next field, toggle Admin State to Enabled, enter the maximum number of addresses, the desired
Mode, and then press APPLY.
63