D-Link DES-3226 - Manual (Page 83)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
• Radius Time Out:[10 ] – This specifies the number of seconds NAS waits for a reply to a
RADIUS request before transmitting the request.
• Radius Maximum Retransmit:[2 ] –This specifies the number of times NAS transmits each
RADIUS request to the server before giving up.
• Accounting Method:<Radius Server> – To use a RADIUS Server, toggle from None to Radius
Server.
• Accounting Mode:<Start and Stop> – Select the desired method: Start and Stop, Stop only, or
None.
Figure 6-48. Configure Authentic Radius Server screen
This screen allows you to set the following features:
• Succession: <First> – Choose the desired RADIUS server to configure: First, Second or Third.
• Radius Server: [0.0.0.0] – Set the RADIUS server IP.
• Authentic Port:[ 1813 ] – Set the RADIUS authentic server(s) UDP port. The default value is
1813.
• Accounting Port:[ 1813 ] – Set the RADIUS account server(s) UDP port. The default value is
1813.
• Key – Set the key the same as that of the RADIUS server.
• Confirm Key – Confirm the shared key is the same as that of the RADIUS server.
• Status:<Invalid> –This allows you to set the RADIUS server as Valid or Invalid.
73