Austin Hughes IGM-03 - Manual (Page 54)

www.austin-hughes.com UM-IGM-03-Q314V1 P.49
In < Outlet Setting >, user can
- Change “ Name “ of outlet
- Change “ Power up sequence delay “ of outlet ( Switched PDU models only )
- Change “ Alarm amp. “ , “ Rising alert amp. “ & “ Low alert amp. “ of outlet ( Outlet level
measurement PDU models only )
- Click “ Apply “ to finish the above settings
- Click “ Reset “ to reset peak amp. or kWh of outlet ( Outlet kWh Switched PDU only )
< 6.3 > PDU