Austin Hughes IGM-03 User Manual
Page 53
www.austin-hughes.com
UM-IGM-03-Q314V1
P.48
< 6.3 > PDU
In < PDU Status >,
user can monitor PDU’s status in details based on Master IP group
In < PDU Setting >, users can
- Change “ Name “ and “ Location “ of PDU
- Change “ Alarm amp. “ , “ Rising alert amp. “ & “ Low alert amp. “ of PDU’s circuits
- Click “ Apply “ to finish the above settings
- Click “ Reset “ to reset peak amp. or kWh of PDU’s circuits
- Click “ ON / OFF “ to switch On / Off outlet ( Switched PDU models only )
- View On / Off status of outlets
- View aggregated current on the PDU
- View lastest loading & energy consumption of outlets ( Outlet level measurement PDU models only )
- View the lastest T / TH reading connected to the PDU