Austin Hughes IGM-03 - Manual (Page 45)

www.austin-hughes.com UM-IGM-03-Q314V1
P.40
< 5.1 > System Setup
In < Setup > page, administrator can
- Activate max. 30 Master IP groups
- Set the group command password
- Enable / disable the EC box levels
Step 1.
“ Activate ” Master IP group 01
Step 2.
Input “ IP address ” & “ password ” of the IP dongle
Step 3.
“ Enable “ Command password
Step 4.
Input “ New command password ”. Default is “ 00000000 ”
Step 5.
Input new command password in “ Confirm new password ” again.
Step 6.
Click “ Apply ” to finish the Master IP group setup
Step 7.
“ Enable ” the EC box connected to the Master IP group
Step 8.
Click “ Apply ” to finish the EC box setting
Step 9.
Repeat step 1 to 9 for other Master IP groups if necessary