ADLINK CoreModule 745 - Manual (Page 11)

Chapter 2 Product Overview
CoreModule 745 Reference Manual 5
Module Features
• CPU
 Provides an Intel Atom 1.67GHz N455 or 1.83GHz D525 processor core
 DMI (Direct Media Interface) with 1 GB/s of bandwidth in each direction
 Enhanced SpeedStep® technology
 On die 512-kB, 8-way L2 cache
• Memory
 Single standard 204-pin DDR3 SODIMM socket
 Supports +1.5V DDR3, 800MHz RAM up to 2GB
 Supports non-ECC, unbuffered memory
• Interface Buses
 PC/104 and PC/104-Plus Interfaces
 PC/104 bus speeds up to 8MHz (16-bit ISA Bus)
 PC/104-Plus bus speed at 33MHz (32-bit PCI Bus)
 PCI 2.2 compliant
• IDE Channel
 Supports one enhanced IDE controller
 Supports on-board Solid State Drive (SSD) with default 4GB capacity
• SATA
 Supports two SATA ports from the ICH8-M I/O Hub
 Provides two standard SATA connectors
• Serial Ports
 Provide three buffered serial ports with full handshaking
 Provide 16550-equivalent controllers, each with a built-in 16-byte FIFO buffer
 Support full modem capability
 Support RS-232 operation
 Support RS-232, RS-485, or RS-422 operation on two ports (COM1 and COM2)
 Support programmable word length, stop bits, and parity
 Support 16-bit programmable baud-rate generator and an interrupt generator
• USB Interface
 Provides two root USB hubs
 Provides up to four USB ports
 Supports USB boot devices
 Supports USB v2.0 EHCI and v1.1 UHCI
 Supports over-current detection status
• Keyboard/Mouse Interface
 Provides PS/2 keyboard interface
 Provides PS/2 mouse interface