ADLINK IMB-S90 - Manual (Page 63)

IMB-S90 IPMI User’s Manual
63
The fields of RADIUS Settings Page are explained below.
RADIUS Authentication: Option to enable/disable RADIUS authentication.
Port: The RADIUS Port number.
Note:
• Default Port is 1812.
• Port value ranges from 1 to 65535.
Server Address: The IP address of RADIUS server.
Note:
• IP Address made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.
• Each Number ranges from 0 to 255.
• First Number must not be 0.
Secret: The Authentication Secret for RADIUS server.
Note:
• This field will not allow more than 31 characters.
• Secret must be at least 4 characters long.
• White space is not allowed.
Extended Privileges: This field is used to assign KVM and VMedia privilege for the user.
Advanced Settings: For setting the advanced features.
Save: To save the settings.
Reset: To reset the modified changes.
3.7.15.1 Procedure
1. Enable the RADIUS Authentication checkbox to authenticate the RADIUS.
2. Click Advanced Settings
• For Authorization Purpose, configure the Radius user with Vendor Specific
Attribute in Server side.
Example: 1
testadmin Auth-Type :=PAP,Cleartext-Password:=”admin”
Auth-Type :=PAP, Vendor-Specific=”H=4”