ADLINK IMB-S90 - Manual (Page 30)

IMB-S90 IPMI User’s Manual
30
6. Configure IP addresses in Domain Controller Server Address1, Domain Controller
Server Address2 & Domain Controller Server Address3.
Note: IP address of Active Directory server: At least one Domain Controller Server
Address must be configured.
• IP Address made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.
• Each number ranges from 0 to 255.
• First number must not be 0.
• Domain Controller Server Addresses will supports IPv4 Address format and
IPv6 Address format.
7. Click Save to save the entered settings and return to Active Directory Settings
Page.
8. Click Cancel to cancel the entry and return to Active Directory Settings Page.
3.7.1.1.1 To add a new Role Group
9. In the Active Directory Settings Page, select a blank row and click Add Role Group
or alternatively double click on the blank row to open the Add Role group Page as
shown in the screenshot below.
Add Role group Page
10. In the Role Group Name field, enter the name that identifies the role group in the
Active Directory.
Note:
• Role Group Name is a string of 255 alpha-numeric characters.
• Special symbols hyphen and underscore are allowed.
11. In the Role Group Domain field, enter the domain where the role group is located.
Note:
• Domain Name is a string of 255 alpha-numeric characters.
• Special symbols hyphen, underscore and dot are allowed.