ADLINK IMB-S90 - Manual (Page 124)

IMB-S90 IPMI User’s Manual
124
Description: This command works with network medium using the ipv6 address
2000::2005, which start to flash the new rom.ima to the firmware with FORCE BootLoader
Upgrade.
Eg8: ./Yafuflash –nw –ip 155.166.132.12 rom.ima -i
Description: This command works with network medium using the ip 155.166.132.12,
which start to flash the new rom.ima using interactive upgrade mode and user will be
prompt to select the Number of modules and module names to upgrade.
Eg9: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin -img-section-info
Description: This command works with network medium using the ip 155.166.132.12,
which displays the details of Existing Firmware.
Eg10: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin -img-info
Description: This command works with network medium using the ip 155.166.132.12,
which displays the details of Existing Firmware Version.
Eg11: ./Yafuflash –nw –ip 155.166.132.12 –u admin –p admin public.pem –replace-
publickey
Description: This command works with network medium using the ip 155.166.132.12,
which replaces the public key in Existing Firmware.
Eg12: ./Yafuflash -nw -ip 155.166.132.12 rom.ima -preserve-sdr
Description: This command works with network medium using the ip 155.166.132.12,
which will ask for other configurations which are already set to be preserved to preserve or
not and after that it will start to flash the new rom.ima to the firmware with preserving SDR
as well as selected configurations.
Eg13: ./Yafuflash -nw -ip 155.166.132.12 rom.ima -preserve-snmp -preserve-ntp
Description: This command works with network medium using the ip 155.166.132.12,
which will ask for other configurations which are already set to be preserved to preserve or
not and after that it will start to flash the new rom.ima to the firmware with preserving
SNMP and NTP as well as selected configurations.
Eg14: ./Yafuflash -nw -ip 155.166.132.12 rom.ima -preserve-fru -ignore-existing-overrides
Description: This command works with network medium using the ip 155.166.132.12,
which starts to flash the new rom.ima to the firmware with preserving FRU configurations
only.
Eg15: ./Yafuflash -nw -ip 155.166.132.12 rom.ima -preserve-fru -preserve-snmp -ignore-
existing-overrides
Description: This command works with network medium using the ip 155.166.132.12,
which starts to flash the new rom.ima to the firmware with preserving FRU and SNMP
configurations only.
Eg16: ./Yafuflash –nw –ip 155.166.132.12 rom.ima -quite