ADLINK IMB-S90 - Manual (Page 55)

IMB-S90 IPMI User’s Manual
55
Note: Value ranges from 1 to 255.
• Event Data 1 AND Mask field is used to indicate wildcarded or compared
bits.
Note: Value ranges from 0 to 255.
• Event Data 1 Compare 1 & Event Data 1 Compare 2 field is used to indicate
whether each bit position’s comparison is an exact comparison or not.
Note: Value ranges from 0 to 255.
8. In the Event Data 2 Configuration section,
• Event Data 2 AND Mask field is similar to Event Data 1 AND Mask.
• Event Data 2 Compare 1 & Event Data 2 Compare 2 fields are similar to
Event Data 1 Compare 1 and Event Data 1 Compare 2 respectively.
9. In the Event Data 3 Configuration section,
• Event Data 3 AND Mask field is similar to Event Data 1 AND Mask.
• Event Data 3 Compare 1 & Event Data 3 Compare 2 fields are similar to
Event Data 1 Compare 1 and Event Data 1 Compare 2 respectively.
10. Click Add to accept the modification and return to Event filter list.
11. Click Reset to reset the modification done.
12. Click on Cancel to cancel the modification and return to Event filter list.
13. In the Event filter list, select the configured slot and click Modify or alternatively
double click the configured slot to modify the existing event filter entry.
14. In the Event filter list, click Delete to delete the existing filter.