ADLINK IMB-S90 - Manual (Page 47)

IMB-S90 IPMI User’s Manual
47
Note:
• IP Address made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.
• Each Number ranges from 0 to 255.
• First Number must not be 0.
IPv6 Configuration: This option lists the following IPv6 configuration settings.
IPv6 Settings: This option is to enable/disable the IPv6 settings in the device.
Obtain an IPv6 address automatically : This option is to dynamically configure IPv6
address using DHCP (Dynamic Host Configuration Protocol).
IPv6 Address: To specify a static IPv6 address to be configured to the device. Eg:
2004::2010
Subnet Prefix length: To specify the subnet prefix length for the IPv6 settings.
Note:
• Value ranges from 0 to 128.
Default Gateway: Specify v6 default gateway for the IPv6 settings.
VLAN Configuration: It lists the VLAN configuration settings.
VLAN Settings: To enable/disable the VLAN support for selected interface.
VLAN ID: The Identification for VLAN configuration.
Note:
• Value ranges from 1 to 4095.
VLAN Priority: The priority for VLAN configuration.
Note:
• Value ranges from 1 to 7.
• 7 is the highest priority for VLAN.
Save: To save the entries.
Reset: To Reset the modified changes.
3.7.9.1 Procedure
1. Select the LAN Interface from the drop down list.
2. Check Enable to enable the LAN Settings.