ADLINK IMB-S90 - Manual (Page 57)

IMB-S90 IPMI User’s Manual
57
Destination Selector: To choose a particular destination from the configured destination
list.
Note: LAN Destination has to be configured - under Configuration->PEF->LAN
Destination.
Add: To save the new alert policy and return to Alert Policy list.
Modify: To modify the existing entries.
Delete: To delete the selected configured Alert Policy.
3.7.14.2.1 Procedure:
1. In the Alert Policy Tab, select the slot for which you have to configure the Alert
policy. That is, In the Event Filter Entry Page, if you have chosen Alert Policy
number as 4, you have to configure the 4
th
slot (the slot with Policy Number 4) in the
Alert Policy Tab.
2. Select the slot and click Add or alternatively double click on the empty slot to open
the Add Alert Policy Entry Page as shown in the screenshot below.
Add Alert Policy Entry Page
3. Policy Entry # is a read only field.
4. Select the Policy Number from the list.
5. In the Policy Configuration field, check Enable if you wish to enable the policy
settings.
6. In the Policy Set field, choose any of the Policy set from the list.
7. In the Channel Number field, choose particular channel from the available channel
list.
8. In the Destination Selector field, choose particular destination from the configured
destination list.
Note: LAN Destination has to be configured under Configuration->PEF->LAN
Destination. That is if you select the number 4 for destination selector in Alert