ADLINK Express-CBR - Manual (Page 44)

Chapter 4 BIOS Setup
40 Reference Manual Express-CBR
• Select slots with TS on DIMM [No TS on DIMM
TS on DIMM in Slot SODIMM0
TS on DIMM in Slot SODIMM1
TS on DIMM in Slot SODIMM0 and SODIMM1]
• PCH Thermal Device
- MCH Temp Read [Disabled; Enabled]
- PCH Temp Read [Disabled; Enabled]
- CPU Energy Read [Disabled; Enabled]
- CPU Temp Read [Disabled; Enabled]
- Alert Enable Lock [Disabled; Enabled]
- CPU Alert [Disabled; Enabled]
- MCH Alert [Disabled; Enabled]
- PCH Alert [Disabled; Enabled]
- DIMM Alert [Disabled; Enabled]
♦ Intelligent Power Sharing
• Intelligent Power Sharing [Disabled; Enabled]
- MCH Turbo [Disabled; Enabled]
- PPEC Config [0]
- IPS Policy [DRIVER; PROCESSOR; BALANCED; GRAPHICS]
- Core Temp Limit [Disabled; Enabled]
- MCH Power Limit [Disabled; Enabled]
- Processor Power Limit [Disabled; Enabled]
- Core Power Limit [Disabled; Enabled]
- Run Time Interface [EC uses SMBus; BIOS uses MMIO]
• Serial Port Console Redirection
♦ COM1
• Console Redirection [Disabled; Enabled]
• Console Redirection Settings
♦ COM2
• Console Redirection [Disabled; Enabled]
• Console Redirection Settings
♦ Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
• Console Redirection [Disabled; Enabled]
• Out-of-Band Mgmt Port [COM1; COM2]
• Data Bits 8
• Parity None
• Stop Bits 1
• Terminal Type [VT-UTF8]