beautypg.com

Isid, Enable dhcp, Target name – ADLINK aTCA-6200A User Manual

Page 68: Authentication type, Save changes

background image

68

ISID


This value is derived from MAC address, you can update it by input the last 3 bytes.

Enable DHCP


You can use this option to enable or disable DHCP in Initiator, if you disable it, then the IP
address and other parameters should be setting properly.

Target Name


You can use this option to set iSCSI target name. Only iqn. format is accepted, this
parameter should be the same with iSCSI target/server settings.

Authentication Type


You can use this option to choose authentication method, this parameter should be the
same with iSCSI target/server settings.

Save Changes


After parameters are set, you can save changes. Note: If you go to other pages without “save
changes” in here, the parameters will not be saved.

See also other documents in the category ADLINK Hardware: