ADLINK aTCA-6200A - Manual (Page 17)

17
3.1.3 Intel® C604 PCH Overview
The Intel® C604 Chipset PCH provides a connection point between various I/O components and DMI
based processors.
Functions and capabilities include:
‹
PCI Express Base Specification, Revision 2.0 support for up to eight ports with transfers up to 5
GT/s.
‹ PCI Local Bus Specification, Revision 2.3 support for 33 MHz PCI operations (supports up to four
Req/Gnt pairs).
‹ ACPI Power Management Logic Support, Revision 4.0a Enhanced DMA controller, interrupt
controller, and timer functions
‹ Integrated Serial Attached SCSI host controllers at transfer rate up to 3Gb/s on up to four ports.
‹ Integrated Serial ATA host controller switch independent DMA operation on up to six ports.
‹ USB host interface with two EHCI high-speed USB 2.0 Host controllers and 2 rate matching hubs
provide support for support for up to fourteen USB 2.0 ports
‹ Integrated 10/100/1000 Gigabit Ethernet MAC with System Defense
‹ System Management Bus (SMBus) Specification, version 2.0 with additional support for I2C*
devices
‹ Intel® High Definition Audio Supports
‹ Intel® Rapid Storage Technology enterprise (Intel® RSTe)
‹ Intel® Active Management Technology (Intel® AMT)
‹ Intel® Virtualization Technology for Directed I/O (Intel® VT-d)
‹ Intel® Trusted Execution Technology (Intel® TXT)
‹ Low Pin Count (LPC) interface Firmware Hub (FWH) interface
‹ Serial Peripheral Interface (SPI)
‹ Intel® Anti-Theft Technology (Intel® AT)
‹ JTAG Boundary Scan support
3.1.4 Intel® Communications Chipset 8920
The Intel
®
Communications Chipset 8920, enables workload consolidation across the control and data
planes. Support for Intel® QuickAssist Acceleration Technology provides optimized packet and network
capabilities by offloading cryptographic and compression workloads to the Intel® Communications
Chipset 8920, freeing up CPU resources.
‹
PCI Express Gen2 x16 Uplink
‹ Support Intel
®
QuickAssist Technology