ADLINK aTCA-6200A - Manual (Page 58)

58
6.3.5 SAS Configuration
You can use this screen to view the current SAS configuration. The SAS device is shown
dynamically when system boot. The SAS option will detect the existed drive and then show
them on this setup screen. User can check the result of detection from this screen. The
screen is shown as below.
6.3.6 USB Configuration
You can use this screen to specify options for the USB configuration settings. Use the up and
down keys to select an item. Use <+> and <-> keys to change the value of the
selected option. The settings are described in the following pages. The screen is shown as
below.