beautypg.com

Iscsi attempt name, Iscsi mode, Internet protocol – ADLINK aTCA-6200A User Manual

Page 67: Connection retry count, Connection establishment time out

background image

67

After select the Ethernet port, you can set the iSCSI and other parameters. The screen is
shown as below.

iSCSI Attempt Name


You can define the attempt name by this option.

iSCSI Mode


You can use this option to enable or disable iSCSI function for the corresponding port.

Internet Protocol


You can choose IPv4 or IPv6 protocol for the corresponding port.

Connection Retry Count


You can use this option to set retry number from 0 to 16, 0 means no retry.

Connection Establishment Time Out


You can use this option to set timeout value in milliseconds, the minimum value is 100
milliseconds and the maximum value is 20 seconds.

See also other documents in the category ADLINK Hardware: