6 video loss tab, 1 video loss mode, 2 video loss trigger – 3xLOGIC VIGIL Server User Manual

Page 70: 3 video loss email notification

8.6 Video Loss Tab

If the video signal is lost from an enabled camera, you can specify an action to take in the Video Loss tab.

8.6.1 Video Loss Mode

Active Signal

Detection

Enables hardware signal loss detection if the VIGIL Server capture card supports this feature.

Sensitivity

Adjusts the Sensitivity of the software signal loss detection.

Blank Cam-

era Detec-

tion

When enabled, the software detects a signal loss when the live video is all black or white. This is useful if the cam-
era is covered or blocked, and can be used in addition to or in place of hardware signal loss detection.

Record

Blank Cam-

era

When enabled, the VIGIL Server continues recording the camera feed during a signal loss. The Recording Mode for
the camera must be set to Constant for this feature to work.

8.6.2 Video Loss Trigger

When enabled, Video Loss Detection triggers a DIO Relay.

Output

Relay

Select the DIO Relay.

Trigger

Select the type of trigger for the DIO Relay: Momentary, which lasts two seconds or Latched, which lasts until the
video is recovered.

8.6.3 Video Loss Email Notification

When enabled, an e-mail will be sent to the recipients configured in Email Settings... For details on how to set up e-mail recipients,
see

Video Motion Alarm Advanced Settings – Email Notification Settings