3xLOGIC VIGIL Server - Manual (Page 59)

8.3.1 Network Camera Type - VIGIL Server
Another VIGIL Server can be connected in the same way you would connect to a Network Camera. This will display any camera that
the VIGIL Server receives and allows you to relay analog video from one recording VIGIL Server to another.
To set up this configuration, select the VIGIL Server type in the Network Camera window. The recommended settings for this setup
are:
Address IP Address of the VIGIL Server.
Port Live Video Port, default 22802.
Camera Number The camera input number on the remote VIGIL Server to be used.
User/Password The username and password used to log into the remote VIGIL Server, if applicable.
ONVIF and PSIA Network Camera Types
ONVIF and PSIA are interoperability standards for IP based Network Cameras. As long as a camera supports either of these standards,
it can be configured with this standard instead of the brand specific standard. ONVIF is the predominate standard currently being util-
ized by manufacturers. When configuring an ONVIF supported camera through the Network Camera Settings, the ONVIF device man-
ager is opened.
- 50 - ©2014 3xLOGIC Inc. | VIGIL Server - User Guide