Pos logging settings, 3 pos/atm alarm settings, Filter settings – 3xLOGIC VIGIL Server User Manual

Page 129

Port

When the POS/ATM connection type is set to IP Server, enter the Port that VIGIL Server will listen on for the POS/ATM
Data stream.

POS Logging Settings

Enabled

Check off this box to enable POS Logging. This log collects raw POS data before it is parsed. Click the ... button to select
a log destination. When troubleshooting POS system issues, users may refer to this raw POS data log for information. The
log file defaults to the naming convention of Connection number - Connection Type - Parser Name. i.e Connection 1_
Serial_Verifone Sapphire.log)

15.1.3 POS/ATM Alarm Settings

This setting becomes available once Priority Cameras are configured.

Enabled

Enable specific POS/ATM Data items to trigger an Alarm Event. This alarm event will be recorded to the POS Partition
if data partitions have been enabled.

Dwell

Time

The time in seconds that the POS/ATM alarm event will record Video footage for.

Output

Relay

Select an Output Relay from the Drop-Down list to trigger when a POS/ATM Data Alarm occurs.

Trigger

Select whether the Relay will be triggered momentary, or latched on for the durations of the Dwell Time.

Filter Settings...

Open the POS/ATM Alarm Filters window to configure POS/ATM events that will trigger POS/ATM Data Alarms.

No Sale Enable POS/ATM Alarms for all ‘No Sale’ items.

Void

Enable POS/ATM Alarms for all ‘Void’ items.

Value

A POS/ATM Alarm will trigger for any item with the value that is
configured. Choose Greater than, Less than or Equal to from the
Drop-Down box, and set a value in the first entry field. If you
select Between, enter a value in each box tor ecieve entries that
fall between the two specified prices.

Item /

Codes

Tabs

Add or delete specific Item names or codes that will trigger a
POS/ATM Alarm. The text must be an exact match for the
POS/ATM data record including spaces, but it is not case sensitive.

Filter

Method

Select AND to meet all criteria listed before a POS/ATM Alarm is
triggered. Select OR for any criteria to trigger a POS/ATM Alarm.

120