D-Link DES-3326S - Manual (Page 282)

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
282 Web-Based Switch Management
Figure 6-81. BOOTP/DHCP Relay
The following fields can be set:
Parameter Description
BOOTP/DHCP
Relay Status
<Disabled>
This field can be toggled between
Enabled and Disabled using the pull-
down menu. It is used to enable or
disable the BOOTP/DHCP Relay
service on the switch. The default is
Disabled
BOOTP HOPS
Count Limit [4 ] This field allows an entry between 1
and 16 to define the maximum
number of router hops BOOTP
messages can be forwarded across.
The default hop count is 4.
BOOTP/DHCP
Relay Time
Threshold [0 ]
Allows an entry between 0 and
65535 seconds, and defines the
maximum time limit for routing a
BOOTP/DHCP packet. If a value of 0
is entered, the switch will not