D-Link DES-3326S - Manual (Page 24)

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
24 Unpacking and Setup
Installation
Use the following guidelines when choosing a place to install
the Switch:
♦ The surface must support at least 3 kg.
♦ The power outlet should be within 1.82 meters (6 feet) of
the device.
♦ Visually inspect the power cord and see that it is secured
to the AC power connector.
♦ Make sure that there is proper heat dissipation from and
adequate ventilation around the switch. Do not place
heavy objects on the switch.
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf, the rubber
feet included with the device should first be attached. Attach
these cushioning feet on the bottom at each corner of the
device. Allow adequate space for ventilation between the device
and the objects around it.