Audio adjustments, Supert-bass system, Press t-bass – Aiwa Z-L70 User Manual
Page 9: Volume control, Bbe system, Press bbe, Using the headphones, Sound adjustment during recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SOUND
AUDIO ADJUSTMENTS
I
SUPERT-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels or the off position to suit your preference.
-X.
(A
Z
o
B
s
u
NOTE
Low-frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low-frequency sound is already
emphasized. In this case, cancel the T-BASS system.
VOLUME CONTROL
Turn VOLUME on the main unit, or press VOL yX
or N/ on the remote control.
The volume level is displayed as a number from 0 to MAX (50).
The volume level is automatically set to 20 when the power is
turned off with the volume level set to 21 or more.
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
It also enriches the Karaoke function to make your voice sound
clear and pleasant.
Press BBE.
Each time it is pressed, the level changes. Select one of the
three levels or the off position to suit your preference.
Using the headphones
Connect headphones to PHONES jack with a stereo standard
plug (
06.3
mm, 'A inch).
No sound is output from the speakers while the headphones are
plugged in.
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones can be freely varied without affecting the recording.
NOTE
V/hen piaying back a tape recorded with BBE, it is recommended
that BBE be set to off to avoid distorted high frequency sound.
ENGLISH
9