Setting the sl, Setting the tl, Setting the timer – Aiwa Z-L70 User Manual
Page 25: Sleep
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SETTING THE SL
I
The unit can be turned off automatically at a specified time.
Use the remote control.
1 Press SLEEP on the remote control.
N ruv
■A
2 Within 4 seconds, turn MULTI JOG or press
or ►► to specify the time untii the power is
turned off.
The time changes between 5 and 240 minutes in 5-minute
steps.
Specified time
SETTING THE Tl
I
The unit can be turned on at a specified time every day with the
built-in timer.
Preparation
Make sure the clock is set correctly.
1 Press one of the function buttons to seiect a
source.
2 Press TiMER repeatediy untii © appears on the
display.
Time and audio source name flash alternately.
©
C
a
' ,
O PL.i"VV
-TT.-
III
a
o
<
a
GC
Ul
S
H
Q
Z
<
g
2
o
SLEEP
_L
m/-
To check the time remaining until the power turns off
Press SLEEP once. The remaining time is displayed for 4
seconds.
To cancel the sleep timer
Press SLEEP twice so that “SLEEPoFF” appears.
3 Within 6 seconds, turn MULTI JOG to designate
the timer-on time, then press ENTER or
I I .
Turning MULTI JOG changes both the hour and the minute.
or ►► is also available instead of MULTI JOG. Holding
these buttons down will vary the time rapidly.
uHri 12“ 22
■-.M
4 Within 4 seconds, turn MULTi JOG to select the
duration for the timer-activated period.
The duration can be set between 5 and 240 minutes in 5-
minute steps.
or ►► is also available instead of MULTI JOG.
Fri
*s
'
.....
• • ■ • •
.V
The duration will be automatically set after 4 seconds. It will
also be set if ENTER or II is pressed within 4 seconds after
step 4.
(To be continued)
ENGLISH
25