Selecting the programmed equalization curve, Setting a new equalization curve manually, 1 press geq freq (low) – Aiwa Z-L70 User Manual
Page 10: 3 press geq freq (high), Press one of the graphic equalizer preset buttons, To cancel the selected mode, To select with the remote control, Memorizing the new equalization curves, 2 within 8 seconds, press enter, To select the stored equalization curve
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■GEQ
SELECTING THE PROGRAMMED
EQUALIZATION CURVE
This unit provides the foiiowing 4 different equaiization curves:
ROCK:
Powerfui sound emphasizing trebie and bass
POP:
More presence in the vocais and midrange
LATIN:
Accented higher frequencies for iatin-type music
CLASSIC: Enriched sound with heavy bass and fine trebie
SETTING A NEW EQUALIZATION CURVE
MANUALLY
The equaiization curve can be customized to suit your preference.
1 Press GEQ FREQ (LOW).
The iowest ievei frequency indicator fiashes for 8 seconds.
2 Within 8 seconds, turn MULTI JOG to adjust the
ievei of the lowest frequency.
» s/
6EQ \:
m
\ '»‘x
3 Press GEQ FREQ (HIGH).
The highest ievei frequency indicator fiashes for 8 seconds.
4 Within 8 seconds, turn MULTi JOG to adjust the
ievei of the highest frequency.
6EQ
n\\
ssf
The frequency ievei indicators between the iowest and the
highest are adjusted accordingiy.
Press one of the graphic equalizer preset buttons.
The PRGM indicator turns on.
The seiected program mode indicator fiashes and that program
mode appears for 4 seconds on the dispiay.
ROCVi.
To cancel the selected mode
Press the selected graphic equalizer preset button. “GEQ OFF”
is dispiayed and the equaiization curve becomes fiat.
To select with the remote control
Press GEQ repeatedly until the desired program mode is
displayed.
ROCK-
POP-
LATIN ■
CLASSIC ■
- PRGM mode
GEQ OFF ^GEQ M4^GEQ M3-^GEQ M2^GEQ M1>
(cancel)
i_ _ ...... MANUAL mode..........-
MEMORIZING THE NEW EQUALIZATION
CURVES
Up to 4 customized equalization curves can be stored on the
MANUAL mode M1-M4.
1 Set a new equalization curve with GEQ FREQ and
MULTI JOG.
See
“SETTING
A
NEW
EQUALIZATION
CURVE
MANUALLY”.
The created equalization curve is displayed for 8 seconds.
2 Within 8 seconds, press ENTER.
“MEMORY” is displayed and all the manual mode indicators
flash for 8 seconds. Go to step 3 within those 8 seconds.
• If this step is not completed within 8 seconds, press GEQ
FREQ first to display “GEQ ON”. Then press ENTER within
8 seconds.
3 Press one of the graphic equalizer preset buttons
M1-M4.
The MANUAL indicator turns on and the equalization curve
is stored.
To select the stored equalization curve
Press one of the graphic equalizer preset buttons M1-M4.
10
ENGLISH