Aiwa Z-L70 - Manual (Page 12)

PRESETTING STATIONS PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
2
1
The unit can store a total of 32 preset stations for all bands.
When a station is stored, a preset number is assigned to the
station. Use the preset number to tune in to a preset station
directly.
1 PressTUNER/BAND to select a band, and tune in
to a station with ◄◄ DOWN or ►►UP.
2 Press 11 SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to a preset station.
Frequency
3 Repeat steps 1 and 2.
No more stations will be stored if a tofal of 32 preset stations
have already been stored.
NOTE
■ When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
' “FULL” is displayed if you attempt to store more than 32 preset
stations.
1
2
1 Press TUNER/BAND to select a band.
2 Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Press TUNER PRESET
repeatedly until the preset number flashes (preset tuning mode),
and turn MULTI JOG. The preset numbers are selected in
sequence as you turn MULTI JOG.
• ◄►PRESET is aiso available to select the preset number.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared with the
numbered buttons. Then, press ICLEAR, and press IISET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
12
ENGLISH