Aiwa Z-L70 - Manual (Page 29)

Speaker system SX-WZL70
Main unit CX-ZL70
FM tuner section
Tuning range
Usabie sensitivity (iHF)
Antenna terminais
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Mid-high frequency amplifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz
step)
350 pV/m
Loop antenna
Outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
30 W + 30 W (200 Hz - 20 kHz,
THD less than 1 %, 6 ohms)
0.15% (15 W, 1 kHz, 6 ohms)
90 W + 90 W (50 Hz - 200 Hz,
THD less than 1 %, 6 ohms)
0.15 % (45 W, 135 Hz, 6 ohms)
VIDEO/AUX:310mV
(adjustable)
PHONO: 400 mV (47 kohms)
MIC 1, MIC 2: 1.4 mV (20
kohms)
CD DIGITAL OUT (OPTICAL)
SPEAKERS: accept speakers
of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 -16 ohms
or more
PHONES (stereo jack):
accepts headphones of 32
ohms or more
4 tracks, 2 channels stereo
Cr02 tape: 50 Hz - 16000 Hz
Normal tape: 50 Hz - 15000
Hz
50 dB (Cr02 tape peak level,
above 400 Hz)
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/playback/
erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
Semiconductor laser {X ■■
nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
780
Cabinet type 3 way, built-in subwoofer
Speakers Subwoofer:
220 mm (8% in.) cone type
Full range:
120 mm (4% in.) cone type
Super tweeter:
20 mm ('Vi6 in.) ceramic type
Impedance 6 ohms
Output sound pressure level 89 dB/W/m
Dimensions (W x H x D) 290 x 444 x 296 mm
(1172x 1772x 11% in.)
Weight 6.8 kg (14 lbs. 16 oz.)
Specifications and external appearance are subject to change
without notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
urns
SYSTEM
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
uJ
<
a
ui
z
w
O
General
Power requirements
Power consumption
Dimensions of main unit
(W X H X D)
Weight of main unit
120 VAC, 60 Hz
180 W
360 X 394.5 X 387.5 mm
(1474 X 15% X 1578 in.)
10.5 kg (23 lb. 2oz.)
ENGLISH
29