Connections, Before connecting the ac cord, Important y – Aiwa CX-NA30 User Manual
Page 4: Common
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATIONS
CONNECTIONS
Check your system and accessories
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
iMPORTANT
y
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
1 Connect the right and left speakers to the main
unit.
Connect the right speaker cord to the SPEAKERS R terminals,
and left to the SPEAKERS L terminals.
© CX-NA30 Compact disc stereo cassette reciver
® SX-NÀ34 Front speakers
@ • SX-R210 Surround speakers (For NSX-A35 only)
The speaker cord with the white stripe should be connected
to the O terminal and the black cord to the © terminal.
Common
Remote control AM antenna
FM antenna
Operating Instructions, etc
:
*
Optional SX-R210 Surround speakers are availlable with the NSX-A30