Aiwa CX-NA30 - Manual (Page 22)

SPECIFICATIONS
Speaker system SX-NA34
Main unit CX-NA30
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
30 W + 30 W (50 Hz - 20 kHz,
THD less than 1%, 6 ohms)
0.05%(15W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 150 mV (adjustable)
MIC: 1.8 mV (10 kohms)
SUPER WOOFER: 1.3 V
SPEAKERS: accept speakers of
6 ohms or more
SURROUND SPEAKERS:
accept speakers of 16 ohms or
more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz - 15000 Hz
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/playback/
erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W X H X D)
Weight of main unit
Semiconductor laser {X = 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
120 V AC, 60 Hz
88 W
260
X 309 X 346 mm
(10V4X 12V4X 13%in.)
5.9 kg (13 lbs.)
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
3 way, bass reflex (magnetic
shielded type)
Woofer:
140 mm (5% in.) cone type
Tweeter:
60 mm (2 in.) cone type
Super tweeter:
20 mm ('Vi6 in.) ceramic type
6 ohms
87 dB/W/m
240 X 304 X 250 mm
{972x12x9% in.)
2.8 kg (6 lbs 3 oz.)
Specifications and external appearance are subject to change without
notice. ,
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and. if not installed and used in accordance with the
instructions,
may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
21
ENGLISH