Ask Proxima DP2800 - Manual (Page 45)

Chapter 3 • Using the Desktop Projector
MENU/@ (CYCLOPS) Key
This key allows you to access and modify the current Desktop
Projector settings in the Menu Window, which appears in the
lower portion of the displayed image. This key also allows you to
initiate the light measurement sequence for calibrating the
optional Cyclops interactive pointer system (part number A2060)
and to disable Cyclops when you wish to use Proxima's
Presentation Control Sofiw'are.
1. Press the MENU key to display the Levels Menu.
2. Press the MENU key again to display the Setup Menu.
3. Exit the Menu Window by pressing the MENU key a third
time.
For more information, please refer to the section titled The Menu
Settings later in this chapter.
No1:e: Pressing the MENU key twice in rapid succession will
allow you to:
• Access the Menu Window and go directly to the Setup
Menu, or
• Exit the Menu Windosv from the Levels Menu.
Mates Holding the MENU key down for several seconds
initiates the Cyclops light measurement sequence. For more
information, please refer to your Cychps User’s Guide.
€>
User’s Guide • 3-3