Ask Proxima DP2800 - Manual (Page 33)

Chapter £2 • OataiSed Setup
Connecting a Microphone
When you need to address a larger audience while projecting an
NTSC; PAL, SECAM or S-LTiS video image, plug an amplified
or warcless microphone equipped with a line level output
(maximum level of 1 vok, peak-to-peak) into the Left and Right
AUDIO IN connectors. The microphone wHi work when an
NTSC, PAL, SECAM or S ATiS video image is proiected. If you
wish to address a larger audience while projecting a computer
image, connect the source to the projector s Left and Right
COMPUTER AUDIO IN connectors.
If your microphone s amplifier has only one output, use the RCA
“Y” adapter cable (part number C496) and a standard RCA cable
to connect it to both of the projectors AUDIO IN or
COMPUTER AUDIO IN connectors.
AUDIO OUT
The Model DP2800 contains an internal stereo system consisting
of an amplifier and two speakers. Although this system provides
high qualit}" stereo output, a multimedia presentation may require
connecting the projector to external powered speakers or an
external sound system.
2-1G • Usan's Guide